15
Information on viewing the cable
You can view the cable through the battery slot in the front of the Reader.
Medeco XT
Safe Lock Installation Guide
9. After the Reader is attached to the safe door, carefully pull the cable to remove any slack that remains inside
the Reader assembly.
Tip for spindle adaptor
Take care not to separate the spindle adaptor and spindle assembly from the Reader port plug (if required).
10. Locate the split bushing.
11. On the inside of the safe door, insert the split bushing into the spindle hole by positioning and bending the
cable downward toward the bottom of the spindle hole, as shown in Figure 10. You should fit the cable into
the split section of the bushing. If required, you should also align the spindle in the center of the hole before
inserting the split bushing.
FIGURE 9
