14
6.3 Sanitising
Refer to figure
¢
5 on the foldout pages.
Sanitise on stovetop
(before first use and once
per day after use)
Sanitise in microwave
(once per day after use)
10 min
or
1.
Cover the disassembled, washed
parts, except for the tubing, with
plenty of water and boil at least for
10 minutes. Ensure that the parts are
not in direct contact to the bottom of
the pot.
2.
Allow to dry after sanitising.
1.
Use Quick Clean* bags in the
microwave in accordance with
the instructions on the bags.
2.
Allow to dry after sanitising.
* Refer to local website/shops for
availability in your country.
Drying
1.
Allow to air dry on a clean, unused dish towel or paper towel.
2.
Put the clean and dry parts in a clean storage bag or a clean environment.
Do not store parts in an airtight container/bag if moist. It is important that all residual
moisture dries.
7
4. Dry
Allow to air-dry on a clean, unused dish
towel or paper towel. Store the dry parts
in a clean environment.
Do not store parts in an airtight
container/bag if moist. It is important that
all residual moisture dries.
Air-dry
