11
Troubleshooting
If you do not feel any vacuum at the breast or if the pump ing action
is too weak:
• Check that the breastshield forms a complete seal around the breast.
• Check that the valve is clean and properly fitted (steps 1 and 2,
page 7). If necessary, remove it for clea ning/sterilizati on and reassemble it.
• Check that the tubing are connected correctly.
• For single pumping, check whether the second connection on the pump
has been closed.
Changing the gaskets
1. Turn the cover counterclockwise and pull it out.
2. Remove the gasket for cleaning (see page 5).
1
2
