15
As an alternative to the previous
step 2a
, you can also clean the
pump set in the dishwasher. Place
all parts on the top rack or in the
cutlery section. Use a commercially
available dishwashing detergent.
3
5.2 Before first use / after each use
1
Disassemble the pump set into its
individual parts:
– bottle
– multi lid
– breast shield
– connector and connector lid
– membrane
Check all parts for damage. Replace
damaged or worn parts.
2b
Dishwasher
Drying / storage
Dry with a clean cloth or leave to dry on
a clean cloth.
Put the clean parts in a clean storage
bag or a clean environment. Do not store
parts in an airtight container/bag. It is
important that all residual moisture dries.
2a
l
Rinse all parts with cold, clear
drinking-quality water (approx. 20 °C).
l
Clean these parts with plenty of warm,
soapy water (approx. 30 °C). Use a
commercially available washing-up
liquid, preferably without artificial
fragrances and colouring (pH neutral).
l
Rinse the parts with cold, clear
drinking-quality water (approx. 20 °C).
1
