19
6. Preparing for pumping
6.1 Card and cord protector
2
3
Insert the cord into the card and
cord protector in a loop around
the pin.
Make sure there is enough play
to plug the cord in.
Push the card and cord protector
over the guide rail on the back until
it stops. Tighten the screw.
6.3 Changing the program card
PLUS
1
2
Plug the power cord into
the mains socket.
As soon as the card compartment
is revealed (step 1 in chapter 6.1),
the card can be removed and
replaced or changed.