When a USB flash drive is connected to the module, the LCD will
display the USB icon. Besides playing back MP3 songs and recording,
you can also execute the following operations with USB flash drive:
1.
Select a playback folder for playing back USB songs.
2.
Load user voices from USB flash drive to the module.
3.
Format the USB flash drive.
Note:
The module supports USB flash drives (4G to 64G) in FAT32 format.
USB flash drives of trusted brand names, such as Kinston and SanDisk
are preferable. We recommend formatting the USB flash drive on the
module before using.
Song Folder
You can save 99 songs at most in a folder on USB flash drive, and save
extra songs in a different folder. The default song folder is “/SONG”, but
you can select a different folder to play back the songs in that folder.
1.
Press the [SONG] button, then press the [MENU] button to enter
USB menu.
2.
Press the [
∧
]/[
∨
] buttons or [F1]/[F2] buttons to select “Song
Folder”, then press [F3 (ENTER)] to enter FOLDER menu.
3.
Press the [
∧
]/[
∨
] buttons or [F1]/[F2] buttons to select a folder, then
press [F3 (ENTER)] to confirm.
Load Voice
You can load your favorite voice from USB flash drive to the module
and use it as a user voice.
1.
Press the [SONG] button, then press the [MENU] button to enter
USB menu.
2.
Press the [
∧
]/[
∨
] buttons to select “Load Voice”, then press [F3
(ENTER)] to enter LOAD VOICE menu. The LCD will display voice
files (.WAV) in the “/VOICE” folder.
Notes:
1.
WAV format: 16 bit; 48k / 44.1k /32k / 22.05k / 11.025k sampling
rate.
2.
Make sure the WAV files are in the “/VOICE” folder on USB flash
drive. You can put 99 files at most in this folder. Total capacity of
WAV files loaded to the module should be less than 15M Byte.
3.
Press the [
∧
]/[
∨
] buttons or [F1]/[F2] buttons to select a desired
WAV file, then press [F3 (ENTER)] to confirm. The LCD will display
“Waiting...” to indicate that loading is in process.
USB Memory
22
SONG
F3
F1
F2
C
M
Y
CM
MY
CY
CMY
K
AW_DD638_manual_G02_180504.pdf 22 18/5/14 14:48
