18
1.
Press the [
] button to enter REC menu.
The click will be turned on. You can press the [CLICK] button to
mute the click sound, but the [CLICK] button LED will keep blinking.
2.
In REC menu, you can adjust the following settings:
Use the data dial or [<]/[>] buttons to select a user song to which
recording will be saved.
Press [F1 (P-CNT)] to turn the pre-count function on or off.
Press [F3 (TEMPO)] to display the tempo, then use the data dial
or [<]/[>] buttons to change the tempo value.
Press [F2 (USB)] to enter MP3 REC menu. (This button is not
available until a USB flash drive is properly connected to the
module).
3.
Press the [
] button or simply hit a pad to start recording. Song
accompaniment and drum performance will be recorded, but the
click sound will not be recorded.
Note:
During recording, only these buttons are available: [F3 (STOP)],
[CLICK], [EXIT] and [
].
Rename and Save MIDI Recording
During recording, you can press [F3 (STOP)], [
] or [EXIT] to stop
recording and enter RENAME menu.
Button operation in RENAME menu:
NOTE:
1.
MP3 recording does not support RENAME, and the recorded song
will be automatically saved as “SONG_xxx.MP3”.
2.
You can enter 12 characters at most for a name.
3.
If you use a user kit for MIDI recording, but switch to a different drum
kit for playback, the playback effect may be different from recording.
4.
When Click Output is configured as “Main+Phone”, in MP3 recording,
the click sound will also be recorded.
5.
iKit mode supports only MP3 recording.
Recording
Button
[
∧
]/[
∨
]
Data dial or [<]/[>]
[F1]
[F2]
[F3]
[EXIT]
Description
Move the cursor to the left or to the right.
Change the selected character.
Insert a space on the left side of the selected character, and this
character will move one space to the right.
Delete the selected character, and the next character will move
one space to the left.
Confirm and save.
Exit RENAME menu, and save it in the default name “U_Song_xx”.
C
M
Y
CM
MY
CY
CMY
K
AW_DD638DX_manual_G01_180529.pdf 18 18/5/30 11:05
