1.Select
“
Format
”
in card menu, press
, we will ask you to confirm the
operation.
[SAVE/ENTER]
2.Press
to confirm or press
to abort.
[SAVE/ENTER]
[EXIT]
>>Tab le 9.3
LCD Display
Explain
47
Format
You may see some error information during a card operation. They are caused
by the hardware or file system error of the SD card.
After format, all previous data in the card will be erased. Please make
sure that you have back up all the important information in the card.
DD508 support FAT16 and FAT32 only, some SD card with small capacity
(under 32M) may be using FAT12, in this case, the card would be formatted into
FAT16.
Note:
*
Please take out the card, unlock the card and try again.
** The fatal error can be caused by a damaged card, poor contact, etc. Please clean the metal connection part
of the card and try again.
*** The digital drum can support only FAT16 and FAT32.
No Card !
Card Locked!
Card Error !
FS Error !
The card is not properly inserted into the card slot.
The card is found protected/locked during save/delete or format.*
A fatal error occurred during reading or writing the card. **
The file system of the card is not supported. ***
The error information during a card operation
SD Card
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Summary of Contents for DIGITAL DRUM
Page 1: ...DIGITAL DRUM Instruction Manual ...
Page 62: ...Version G04 ...