DSP Effect
With the built in digital effects, you can add ambiance and depth to
your music in a variety of ways such as adding reverb that makes
you sound like you are playing in a concert hall or adding harmony
notes for a full, rich sound.
1.
The DSP effect is set to ON and the icon on the LCD is lightened
when keyboard is power on.
The
chorus
and
reverb
value
can
be
adjusted
in
the
function
menu
.
2.
Holding down [SHIFT] button, and then press the [DSP] button to
turn DSP effect on or off.
Note:
It may cause a break or a noise while switching on/off the DSP when
style and song playing. This is normal and need not panic.
Mixer
Mixer function can control the volume of different tracks.
1.
Holding down [SHIFT] button, and then press the [Rhythm] button
to set the Rhythm track volume. LCD displays “Rhythm” and the
track volume.
2.
When the LCD displays “Rhythm” , use the data dial or the
[+/YES]/[-/NO] button to adjust the value. Pressing [+/YES] and
[-/NO] button simultaneously can turn off/on a track volume.
3.
The volume of other tracks such as Bass, Chord, Lower, and
Upper can be set the same to Rhythm track.
LCD Display
Rhythm: xxx
Bass: xxx
Chord: xxx
Lower: xxx
Upper: xxx
Range
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
Note:
In voice R1 setting status, the [Upper] button adjusts the main voice
volume. In voice R2 setting status, the [Upper] button adjusts the R2
voice volume.
S t G r d P n o
R h y t h m
23
Pedal Function
The sustain pedal is a single pedal which can be configured to different
pedal function. Please refer the pedal setting menu for detail.
1.
Sustain Pedal(Pedel Sust)
If assign pedal is set as “Pedel Sust”, step on the assign pedal, all
notes played on the keyboard will have a longer sustain
2.
Pedal Start/Stop(Pedal St/T)
If pedal assign is set as “Pedal St/T”, the assign pedal will have the
same function as [START/STOP] button.
3.
Pedal Memory Select(Pedal Mem)
If pedal assign is set as “Pedal Mem”, it will load the next memory
parameter from M1 when you step on the pedal.
The total number of memory you can load is 32.
P e d a l
S u s t
P e d a l S t T
/
P e d a l M e m
The option and parameters are as
follows
:
0
5
25
75
95
100
AW_DP388_Manual_G15_150405
2015
4
4
16:52:40
