Function Menu
Harmony Speed
When the harmony type is echo, tremolo or trill, the harmony speed
can set the harmony effect note speed to 4 default speed.
1.
Holding down [SHIFT] button, and then press [F/-]
button to select harmony speed menu. LCD displays “xxx
HarmonySpeed”. Use [+/YES]/ [-/NO] or data dial to change
harmony speed. Range: 1~4.
2.
Press [+/YES] and [-/NO] simultaneously will set the chorus volume
to its default setting:001.
MIDI OUT
1.
Holding down [SHIFT] button, and then press [F/-] button
to select Midi Out menu. LCD displays “xxx Midi Out”.
Use [+/YES]/ [-/NO] or data dial to change Midi Out channel: 1~16.
2.
Press [+/YES] and [-/NO] simultaneously will set Midi Out channel to
its default setting: 001.
Power Off
This function is used to set automatic shutdown time.
1.
Press [F/-] button to select power off menu. LCD displays
“xxx PowerOff”. Use [+/YES]/ [-/NO] or data dial to change time
value: OFF, 030, 060.
2.
Press [+/YES] and [-/NO] simultaneously, the time will be restored to
default: 030 (30 minutes).
MIDI IN
1.
Holding down [SHIFT] button, and then press [F/-]
button to select MIDI in menu. LCD displays “xxx Midi In”. Use
[+/YES]/ [-/NO] or data dial to change MIDI in channel:1~16, ALL.
2.
Press [+/YES] and [-/NO] simultaneously will set MIDI in channel to
its default setting: ALL.
Performance Beat Type
This function is used to set the performance assistant beat type.
1.
Holding down [SHIFT] button, and then press [F/-] button
to select Perform Beat menu. LCD displays “xxx Perform Beat”.
Use [+/YES]/ [-/NO] or data dial to change performance beat: 4-4,
3-4, 2-4, 6-8.
2.
Press [+/YES] and [-/NO] simultaneously will set performance beat
channel to its default setting: 4-4.
HarmonySpeed
Midi In
Midi Out
PowerOff
Perform Beat
27
0
5
25
75
95
100
AW_DP388_Manual_G15_150405
2015
4
4
16:52:43
