User guide P9-0152-B
18 of 60
Version 3.0.0/2013
Medema Production A/S
Driving the Mini Crosser M
2
Cabin
Getting in and out
It is important to learn a safe technique for getting in and out of
the Mini Crosser.
In general the following method should be followed:
•
Make sure that the Mini Crosser M
2
Cabin
is off (switch turned to
0) when getting in and out, otherwise the Mini Crosser could start
if the accelerator was touched inadvertently.
•
Make sure that the brake is on. (Lever for disengaging motor in
top position.)
•
Put the steering column in vertical position.
•
If necessary, raise the armrest.
Note! - Do NOT use the dors as support, when entering or
getting out of the vehicle.
For some users the assistance of an attendant can be
recommended. The attendant should:
•
Take care not to injure him/herself when lifting/lowering/supporting
the user.
•
Make sure that the Mini Crosser is stable and unable to move.
Turn off the Mini Crosser and check that the brake is on.
•
Make sure that the seat the user is being moved to is stable.
Turn the Mini Crosser off, return the
steering column to upright position and
raise the armrest.
IMPORTANT!
The Mini Crosser will turn
itself off automatically after
it has been stationary for
10 minutes even if the key
has been turned to driving
position. The battery indicator
fl ashes with 6 lamps at a rate
of about 3 seconds.
To restart the vehicle, the
key must be turned to stop
position (0) and then to
driving position (1).
