User guide P9-0152-B
38 of 60
Version 3.0.0/2013
Medema Production A/S
Take the rear cover off. The plastic cover can be removed by squeezing the sides.
Now the fuses can be replaced.
Fuses
The Mini Crosser has the following protection systems:
•
As a safeguard against overheating There are two switches
are integrated in the engine. By incipient overheating speed is
reduced to half power, and by prolonged overheating the scooter
will stop. After cooling for 3 to 5 minutes, the scooter is able to
reach full speed and traction.
•
The control fuse protects against mains faults. It is located under
the rear cover.
•
The main fuse protects against short-
circuits in the main current circuit.
The fuses are located under the rear
cover behind the batteries. Fuse type
DIN 2581 - 100A.
•
If the ignition key is turned at the
same time as the accelerator is
operated, the vehicle will not move off
for safety reasons.
•
The lights and horn are protected by electronic fuses, which
protect against any short-circuiting that may occur. To prevent
accidental short-circuiting when a bulb is changed, the Mini
Crosser must be turned off when the new bulb is fi tted and then
turned on again afterwards.
