User guide P9-0152-B
46 of 60
Version 3.0.0/2013
Medema Production A/S
Introduction to seats - Ergo Standard
Lever for seat rotation
Pull the lever back to release
the seat. The seat can then be
turned 90° to either side with a
stop every 45°.
The lever is spring-loaded and the seat locks automatically
when the lever is released.
This lever is located on the right as standard, but can also be
put on the left.
Lever for seat forward/back
Pull the lever out/up to release
the seat on the slide rail.
The seat can then be moved
forward or back as required.
When the lever is released, the seat automatically locks at the
nearest stop.
There is a chock block on the front and back of the slide rail.
Adjusting the angle of the
armrest
The adjusting screw makes it
possible to alter the angle of
the armrest by about 15°.
The arm can be folded right
up to make it easier to get in
and out.
(Height adjustment of the
armrest is an optional extra.)
