User guide 2433-2019-B
41 of 92
Version 2.0.1/2022
Medema A/S
If the described manual release procedures fails, an emergen
-
cy release tool made from red plastic comes with each
docking station.
1. Move wheelchair forward to remove the pressure on the lock pin
2. Place the emergency release tool in the gap between the locking plate
and the docking station.
3. Push the release tool and wheelchair forward until the locking pin has
been forced down - after which the wheelchair can reverse out of the
docking station.
Dahl Engineering offers two docking systems, the Mk ll, and
a new power height adjustable called Dahl VarioDock. Please
also refer to Dahl Engineering instructions for installation, use
and maintenance for the system used.
Installation of the Dahl Docking systems in the vehicle
Only professional companies in the business of converting or
building wheelchair accessible vehicles can order the docking
system from Dahl Engineering.
A qualified and experienced technician must carry out the in
-
stallation. Dahl Engineering can provide vehicle specific instal
-
lation instructions for a large range of vehicles, which must be
respected by the fitter.
Please contact Dahl Engineering for further information about
approved vehicles and fitting positions.
Dahl Engineering contact details are available at:
Summary of Contents for MC 1124 Adult
