Service manual P9-0200-S
36 of 82
Version 2.0.2/2012
Medema Production A/S
Checking the disengagement
The MC Concept is equipped with two sets of brakes: The
motor brake and the parking brake.
Note!
You must NEVER brake the MC Concept by switching off with
the I/O button while moving, as this applies the magnetic brake
with considerable force, with a resulting risk of tipping.
ALWAYS disengage on both sides. The disengagement handles
should be pushed as much out as possible. Otherwise there
is risk of personal and material damage. To resume running
normally with MC Concept, disengagement handles should be
in ”Normal position for driving” on both sides.
Warning!
When the scooter is disengaged, the braking system is
deactivated. If it just disengages on one side, there is a risk that
the scooter starts to roll.
You must NEVER disengage on sloping terrain. This can lead to
serious damage or personal injury.
Make sure that the disengagement handles are placed in
(normal position for driving), which means it’s connected (the
scooter can not be pushed).
If you can push the scooter anyway, the transmission is
defective and needs replacement.
Normal position for driving -
pushed in.
Position for disengagement -
pushed out.
Summary of Contents for MC Concept 1103
Page 82: ...medemagroup...
