Quick guide P9-0101-Q
10 of 16
Version 1.0.0/2011
Medema Production A/S
If there is an electronic fault, a number of lamps in the battery indicator will
light up. The following table shows what they mean.
Further information: See User manual.
Lamps
Causes
Remedy
1 lamp
The batteries need charging or the
connection to a battery is poor.
Check all connections between the
controller and batteries. If these are
fi ne, try charging the batteries
2 lamps
Poor connection to the motor.
Check the connection between
the motor and controller. Contact
supplier.
3 lamps
Short-circuit between the motor
and a battery connection.
Contact supplier - say how many
lamps are lit.
4 lamps
Not in use
5 lamps
Not in use
6 lamps
The motor has overheated.
Stop the unit and wait 3-5 minutes
before restarting. Turn the key to 0
and then to 1 to reset the fault.
7 lamps
Accelerator fault.
Make sure that the accelerator is
in neutral when the Mini Crosser is
turned on.
8 lamps
Controller fault.
Contact supplier.
9 lamps
Poor connection to motor brake or
magnetic brake is disengaged.
Check the connections from brake
to controller, or push the brake lever
up.
Check that the vehicle is not
disengaged.
10 lamps
The controller has been supplied
with a high voltage in excess of 38
V. Usually seen in the case of a
poor connection.
Check all connections from the
batteries to the controller.
Running lights
Charger is connected.
Remove charger.
