Quick guide P9-0101-Q
11 of 16
Version 1.0.0/2011
Medema Production A/S
Serial number
All vehicles have a serial number plate showing the year of production and
serial number. The same serial number can also be found on the front of
the User Manual.
Please quote this number when making inquiries about servicing, spare
parts, etc.
Driving the Mini Crosser E
Getting in and out
It is important to learn a safe technique for getting in and out of the Mini
Crosser.
In general the following method should be followed:
•
Make sure that the Mini Crosser E is off (switch turned to 0) when getting in
and out, otherwise the Mini Crosser could start if the accelerator was touched
inadvertently.
•
Make sure that the brake is on. (Lever for disengaging motor in down position.)
•
Put the steering column in vertical position.
•
If necessary, turn the seat through 45° or 90° and make sure that it is locked in
position (clicked into place).
•
If necessary, raise the armrest.
IMPORTANT!
The Mini Crosser will turn itself off automatically after it has been stationary
for 10 minutes even if the key has been turned to driving position.
To restart the vehicle, the key must be turned to stop position (0) and then
to driving position (1).
