Service manual 1533-2003-S
16 of 108
Version 1.0.2/2020
Medema Production A/S
Hight adjustment seat post standard
The release button pressed in. Press the
button out to release the seat tube.
Release button pressed out. Now the
seat tube can be moved up/down to
the height you wish. Press the release
button again and make sure it is fitted in
one of the 5 holes in the seat tube.
Loosen the counter nut.
Use spanner, 17 mm.
Adjust the seat post to the desired
position. The seat post is marked with a
ring at each centimetre.
Be aware that the black line is holding its position after movement, so the seat is
straight in front of the steering.
Tighten the screw, here after the counter nut.
Mount the seat. Adjust the lining if necessary.
Hight adjustment seat post with position bolt (option)
