Service manual 1533-2003-S
60 of 108
Version 1.0.2/2020
Medema Production A/S
For transport in an estate car, the
seat can be lifted off and the han-
dlebars folded down. This reduces
the maximum height to 69 cm.
The Mini Crosser can be used as a seat during transport in a
van or bus, provided it is securely anchored to the vehicle with
approved four-point belts attached to the restraint points provid-
ed on the Mini Crosser.
The Mini Crosser’s restraint points have been tested and ap-
proved in accordance with ISO 7176-19.
The user must also always be independently restrained in the
actual motor vehicle in accordance with traffic legislation rules.
Contact your local dealer or Medemea A/S for more information.
Example
Restraining the passenger with a
static 3-point seat belt:
Secure to the rearmost retractors.
The shoulder belt must rest against
the collar bone and fall diagonally to
the hip, where it is secured.
Tighten the belt by pulling on the loose strap. Undo it again by
lifting the buckle. This is the same as on an aircraft.
Retractor
with belt
Male and fe-
male parts of
belt done up
Remember to turn the Mini Crosser off during transport. Turn
the key to 0.
However, if at all possible, we recommend that the user occu
-
pies one of the seats in the motor vehicle. All other things being
equal, this is safer.
