Service manual 1533-2003-S
80 of 108
Version 1.0.2/2020
Medema Production A/S
In one side the transaxle is laying on
top of the rear suspension. In the other
side it is fixed from beneath. Remove the
screws from this side first.
When all four screws are removed, the
transaxle can be removed and replaced
with a new one. Mount in reverse order.
On a new transaxle, the note is taped in
place.
Remove the tape and coat it with bearing
grease.
Remount the brake disc. The three
screws should be tightened with 4 Nm.
The plugs should be tightened with 5 Nm.
Remember to mount new cable ties.
