DMR |
5
ALL OTHER CONNECTIONS
Connector
Function
Description
7
LAN
The RJ45 connector allows the included standard 10/100Mb CAT-5e LAN cable to
connect the DMR to a network .
8
Remote Relay Closure
The standard 3 .5 mini mono connector allows a remote switch (contact closure) to
start/stop a session of the DMR .
9
USB
The USB port on the back of the unit can be used for upload or offload of video
content and for network configuration of the DMR . For more information on USB
network configuration, see Appendix B .
10
RS-232
This standard serial DB9 connector allows connection for serial control (note: a
null-modem serial cable is required) .
11
AC Power
The IEC connector allows the included IEC cable to connect the DMR to AC power .
Make sure the power on/off switch is in the off position before plugging in the
power cable .
Setup & Application Diagrams