Media Pointe DMR300 User Manual Download

Page: 5 / 45

DMR200

User’s Guide

V1.1

Table of Contents

Disclaimer-------------------------------------------------------------------------------------------3

Safety Precautions ---------------------------------------------------------------------------------4

Table of Contents ----------------------------------------------------------------------------------5

About This Guide -----------------------------------------------------------------------------------7

Reliability of Information ----------------------------------------------------------------------8

Service Support and Training -----------------------------------------------------------------8

Document Conventions ------------------------------------------------------------------------9

Contents of This Package ----------------------------------------------------------------------9

Chapter 1: Introduction, Overview and Requirements -------------------------------------- 11

Introduction ----------------------------------------------------------------------------------- 12

Front Panel------------------------------------------------------------------------------------ 12

Record Start / Stop Push Button ------------------------------------------------------------13

Yellow LED Indicator-------------------------------------------------------------------------13

RESET Button--------------------------------------------------------------------------------13

Power Indicator------------------------------------------------------------------------------13

USB Port -------------------------------------------------------------------------------------14

Uses & Features ------------------------------------------------------------------------------ 14

Overview -------------------------------------------------------------------------------------- 15

How It Works --------------------------------------------------------------------------------15

Requirements --------------------------------------------------------------------------------- 16

Video/Monitor Requirements ----------------------------------------------------------------16

Network Requirements ----------------------------------------------------------------------16

Optional Requirements ----------------------------------------------------------------------16

Chapter 2: Setup -------------------------------------------------------------------------------- 17

Connecting the DMR300 --------------------------------------------------------------------- 18

The Rear Panel ------------------------------------------------------------------------------18

Auxiliary Connections------------------------------------------------------------------------19

Network Setup-------------------------------------------------------------------------------- 20

How to Assign an IP Address ----------------------------------------------------------------20

Logging In -----------------------------------------------------------------------------------21

Administrator Setup -------------------------------------------------------------------------22

Guest User Setup ----------------------------------------------------------------------------22

IP Settings-----------------------------------------------------------------------------------23

Summary of Contents for DMR300














































Search results

Summary of Contents for DMR300

Reviews:

Related manuals for DMR300

Brands by name

Popular brands

Media Pointe DMR300, User Manual

Search results

Summary of Contents for DMR300

Reviews:

Related manuals for DMR300

Brands by name

Popular brands