Media Pointe DMR300 User Manual Download

Page: 6 / 45

DMR200

User’s Guide

V1.1

Chapter 3: Internal Settings -------------------------------------------------------------------- 25

Security Settings ----------------------------------------------------------------------------- 26

Enable User Security ------------------------------------------------------------------------26

User Password / Confirm User Password ----------------------------------------------------27

Changing the Administrator Password-------------------------------------------------------27

Update Section ------------------------------------------------------------------------------- 28

Upgrade System Firmware ------------------------------------------------------------------28

Reset Configuration--------------------------------------------------------------------------29

Delete All Content ---------------------------------------------------------------------------29

System Information -------------------------------------------------------------------------- 30

Sys Info--------------------------------------------------------------------------------------30

Shutdown ------------------------------------------------------------------------------------31

Reboot--------------------------------------------------------------------------------------------31

Chapter 4: - Archiving and Streaming --------------------------------------------------------- 33

Recordings ------------------------------------------------------------------------------------ 34

Recording Start / Stop-----------------------------------------------------------------------35

Playback on DMR300 ------------------------------------------------------------------------35

Refresh / Delete / Delete all -----------------------------------------------------------------36

Recording Information and Playback Window -----------------------------------------------37

Settings---------------------------------------------------------------------------------------- 40

Recording Mode------------------------------------------------------------------------------41

Live Playback While Recording --------------------------------------------------------------41

Video1 Video Connection --------------------------------------------------------------------42

Video2 Video Connection --------------------------------------------------------------------42

Set Recording Gain --------------------------------------------------------------------------43

Appendix A - Front Panel LED Status----------------------------------------------------------- 44

Appendix B - Factory Default Settings --------------------------------------------------------- 45

Summary of Contents for DMR300














































Search results

Summary of Contents for DMR300

Reviews:

Related manuals for DMR300

Brands by name

Popular brands

Media Pointe DMR300, User Manual

Search results

Summary of Contents for DMR300

Reviews:

Related manuals for DMR300

Brands by name

Popular brands