DIRECTOR Series Operator’s Guide
Document Revision: 0802
Page 82
immediate status of the job (copying images, loading discs, copying discs,
unloading discs, etc.), and the estimated time of completion (E.T.C).
The lower pane is the COMPLETED JOBS window that lists all the jobs
completed by the DIRECTOR. Information displayed for each job includes:
its assigned JobID, the total number of requested CDs, the number of
successful CDs produced, the number of failed CDs produced and the time
each of the jobs was completed.
The Production Process
During production the blank discs will be loaded one at a time from the
input spindle into the recorders and/or printer. Upon successful completion
the discs will be unloaded onto the output spindle. This process will
continue until the job is complete, and the DIRECTOR will then advance to
produce the next job in the queue according to its priority.
However, if the 1
st
input spindle empties before the job is complete the
DIRECTOR will then go to the 2
nd
input spindle. If the 2
nd
input spindle is
empty the screen will now display:
To continue producing the job, place additional blank discs onto the 1
st
input spindle and click the
Yes
button. To stop the job click the
No
button
and the remainder of the job will be aborted. The DIRECTOR will then
advance to produce the next job in the queue according to its priority.
Any discs dropped on the reject/centering spike have failed to record
properly and should not be used. Be sure to remove rejected discs
periodically during operation, if the need arises.
Note:
