DIRECTOR Series Operator’s Guide
Document Revision: 0802
Page 8
The Best Place To Put The DIRECTOR
The best operating location for the DIRECTOR publishing system is in a
climate controlled area, free of dirt, dust, humidity, excessive heat, and
electronic or electromagnetic interference. Room temperature should be
between 65 and 75 degrees Fahrenheit, or between 18 and 23 degrees
Celsius. Place the DIRECTOR on a solid, steady work surface and allow
sufficient room for all incidental work materials. Provide at least six inches
of clearance on all sides of the unit for ventilation.
Safety Precautions
The system is shipped with a three-prong power connector and must be
used with a properly grounded AC receptacle.
DO NOT
try to defeat the
third “ground” prong. All computer peripherals must be properly grounded
and the DIRECTOR is no exception. The use of a power conditioner such
as an Uninterruptible Power Supply (UPS), or a surge protector is highly
recommended. At the very least you should consider connecting the PC
portion of the DIRECTOR to a UPS. The minimum required size is 500VA.
Repairs or alterations should only be attempted by authorized factory
trained technicians. MediaFORM reserves the right to void the warranty if
unauthorized service is performed.
