CD-5916
Operator’s Guide
Document Revision: 060102
Page 27
A R C H I V E O K , P R E S S S T A R T
The master disc is now stored as an image on the hard disk.
Note:
If discs failed to copy properly, the recorder tray drawers stay
closed upon completion. These discs should not be used. To
help you determine the nature of the problem, error messages
can be displayed by pressing the “9” key on the keypad.
•
Press the “START/YES” key, and you will be returned to the main
operating screen:
1 6 X C O P Y O R C O M P A R E
Note:
When the
Multiple Images
feature is “disabled” only one
image can be saved on the hard disk. If a new image is created
the old one is overwritten. However, the CD-to-CD copying
method can still be used to make copies of other discs while
leaving the single hard disk image intact.
Creating Multiple Hard Disk Images
The
Multiple Images
feature allows the CD-5916’s internal hard disk to
store up to six master disc images. The factory setting for this function is
“disabled”. To “enable” it, and create multiple image files, proceed as
follows:
•
From the main operating screen depicted below:
1 6 X C O P Y O R C O M P A R E
•
Press the “2” key. The screen will now read:
F U L L S C A N O P T I O N
P R E S S Y E S / N O
Summary of Contents for CD-5916
Page 1: ...CD 5916 Operator s Guide ...
