Browser based Configuration Menus
Specification
The specification page includes details of the capabilities of the
product. Please note that this unit may not have all the options
mentioned. The Status page shows all the optional features
currently enabled.
Status
Shows the current status of the 782-LT, including its Model,
Serial Number, Unit name, Playlist reference, Media Files
(stored locally), IP Address, Mac Address, Software version,
SIPI Command Set Version, Temperature, Preferred and Actual
Resolution, Media Storage (capacity and used) and PoE status.
Operating Mode
Set the name of the unit, whether to apply a password to the
mobile page here, and the local audio input format.
Video Output
Set the preferred video output resolution here, how long to
show the media name on-screen, and select the preferred
audio, subtitle and closed caption languages (individual
channel selections can also be made via on-screen menus).
Picture Control
This provides a web page interface to control the media that
is currently being shown on the display. Click on a media icon
to show it on screen (the current media is shown highlighted).
Volume and mute controls are also provided on the top-right
pull-down.
Media Files
This shows the Media files that are currently stored in the
on-board flash memory, and the state of any ongoing media
download.
Date/Time
Configure the local time to use a Network (NTP) server if
available. If not, set the date/time manually. Set the local time
zone and daylight saving.
Network Setup
Allows specification of the Network Connection; DHCP or
static addressing, device hostname, IP address, subnet mask,
Gateway and DNS settings. Confirm these with the network
administrator before configuring.
Update Locations
Specify the URL of the MediaStar http server and
folder that the 782-LT will look at for software updates
and a central configuration file. The 782-LT will only
upgrade to new software that has been digitally signed by
MediaStar Systems. You can check the settings are valid as long
as the Media Manager server is already running.
Enablement Code
Enter enablement codes here to reconfigure or expand the
capabilities of your unit. Details can be obtained from your
reseller or MediaStar Systems.
Set Password
A password may be set to prevent the unauthorised
modification of the 782’s configuration. A password consists
of six digits from 0-9. If the password gets lost, contact
MediaStar Systems for assistance, quoting the serial number
of the unit affected.
SNMP
Configure to send SNMP ‘event’ warning messages to
a corporate SNMP monitoring system (MIB files are available
on request).
Email Logs
Event logs can be periodically emailed to a recipient. Specify
the email server and recipient email address here.
Event Log
This shows a full list of the errors or ‘events’ that the 782-LT
has experienced. Significant error messages will also produce
an SNMP trap when enabled.
Playout Log
This shows list of the Media that the 782-LT has been
playing out.
Quick Start Guide
MediaStar 782-LT 4K IPTV & Media Player
200-2444 V1 4/8
The 782’s web page configuration menus allow the full range of operational parameters to be set. When using the
web pages, full contextual help is provided on the right side of the screen. When changes have been made, press
the APPLY button at the bottom of the page to ensure these take effect.
