Technical specifications for CCC
220
CCC
220
:
Charging current (ripple-free):
20 A
Compatible batteries:
12 V, 40 Ah .. 300 Ah – Type Gel, AGM
Dimensions, B x H x D (incl. handle):
220 mm x 75 mm x 205 mm
Weight:
2.6 kg
Efficiency:
not less than 90%
Short-circuit and faulty polarization safe
Mains power:
230V 50Hz
- labeled in accordance with:
the low voltage Directive and the EMC directive
Enclosure rating:
Splash proof, dustproof and water proof
IP54,IP65 and IP67
Insulation class:
II (double-insulated)
This means that the charger can be connected to an ordinary
power socket without earth connection.
Ambient environment
Temperature
Relative air humidity
Air pressure
Use 1)
-10°C .. +30°C
10% .. 90%
70 kPa .. 106 kPa
Transport and storage 2) -40°C .. +70°C
10% .. 90%
70 kPa .. 106 kPa
1): Bearing in mind the safety information, page 2
2): In accordance with the packaging's label
Warning:
The charger may only be used for charging rechargeable 12
V lead batteries
Warning:
You must not recharge batteries that are not rechargeable!
Energy transfer from the mains to the battery uses a patented power circuit.
The charging process is controlled by a built-in microcomputer. The current state of the battery is adapted
automatically. This will optimize the lifetime of the battery.
Once the battery is fully charged, the status changes to trickle charging. Overcharging is not possible.
The charging time is the shortest possible.
The "CHARGING", "COMPLETED" and "ERROR" lights on the front of the charger signal the charging
status.
Any faults in the battery or charger are signaled using error codes (see diagram 2).
Option for (program options):
• TCS additional charging (patented):
• Temperature-compensated standby charging
If the charger has temperature-compensated standby charging, it must be placed in the same
room (the same temperature) as the wheelchair if batteries need to be charged!
• Controlled charging of significantly depleted batteries
• Display of charged capacity (Ampere-hour meter)
• Adaption of charging characteristics to current requirements.
Important:
The charger's properties (program options) may only be changed by authorized personnel!
6
