1
2
3
4
5
6
7
8
9
10
11
12
13
14
First you should tightly connect controller to the mat connector and
only after this plug-in controller into the power outlet. Then turn ON
controller with toggle switch.
Controller also has a temperature dial to completely adjust the heat
in 1°C increments from 86 °F to 158 °F, displayed in Celsius from
30 °C to 70 °C. Sometimes we call the different temperatures “levels”.
Level 1 is 86-98 °F or 30-36 °C (Lowest mode, reveals crystals’ powers
and brings negative ions and other vital natural forces into your home while
you are seeking rest and mental clarity, great to sleep or relax).*
Level 2 is 98-110 °F or 36-43 °C (Low mode, provides a comfortable
setting for all night restful sleep to manage an occasional sleeplessness,
improve absentmindedness, relieve tiredness, and maintain proper
immune function).*
Level 3 is 110-120 °F or 43-49 °C (Low medium mode, great to
create maximum relaxation and immunity support environment, helpful
to maintain healthy heart, inspired and invigorated mind, improve look
of your skin).*
Level 4 is 120-133 °F or 49-56 °C (Medium mode, use as a part
of your dietary and healthy routine to maintain cholesterol and sugar
levels already within the normal range, alleviate the occasional blue
feeling everyone experiences from time to time).*
Level 5 is 133-145 °F or 56-63 °C (Medium High mode, may be helpful
for healthy lifestyle to alleviate occasional constipation, promote
sexual arousal and performance, relieve temporary water-weight gain
and mild mood changes bringing you back to normal condition).*
Level 6 is 145-158 °F or 63-70 °C (High mode, envelop yourself with
pleasant warmth of natural crystals and gemstones. Together with exercise
patterns it may encourage activity, contribute to spiritual balance, feeling
happy, cleansing, sweating, well-being and better overall health).*
Level 7 is 158 °F or 70 °C (Highest mode, use with extra care to create
maximum soothing environment important for proper muscles and joints
function, optimal strength and flexibility, stress and tension reduction).
The temperatures above reflect the temperature of the inner heating
elements, not the surface of the mat, which can be 10-20 °F lower (or
even lower than this) if the mat is not covered with a thick blanket.
Usually, if the ambient temperature is around 70 °F, it takes between a
half an hour to hour for the mat to reach the maximum level (158 °F,
or 70 °C) if covered it with a thick blanket.
Controller H-60PVA
for the products with PEMF and PHOTON function:
1
Power ON/OFF Toggle Button
– Push it to turn the mat ON/OFF.
When you turn it ON, the Display
will show
ON
. It means that
the controller is ON and ready to choose the program. If controller
display shows
--
it means that the Power is connected but the
Button has not been activated and no functions can be operated.
Press the button harder so that lines
--
start to flicker.
2
POWER indicator
– Lights up when Power is ON.
3
Timer Control Toggle Button
– Select one of 4 options shown on the
Display
:
1H, 4H, 8H, 0H
for 1, 4, 8, 12 hours heating session with
auto shut-off when time expires or you can choose
-H
NO HEATING
MODE for only PEMF and/or PHOTON function without heating.
Press and hold for 5 seconds to turn OFF
Auto-Protection Feature
,
Display
will show
S-
. Press and hold again to reactivate this
feature, Display
will show
SA
.
4
HEATING Operation Indicator
– ON when mat is heating, OFF when
set temperature is reached.
5
Temperature, Timer, Frequency and Program Display
– Switches
into Temperature Mode when the Temperature Dial
is rotated.
Display shows the current Celsius temperature (
30–70 °C
), flashes
to the set temperature when dial is rotated, then back again.
If the temperature is more then 122 °F (50 °C) for longer than
3.5 hours,
Auto-Protection Feature
will decrease it to safe 115 °F
(45 °C) level and display will show
[ ]
.
In Timer mode Display shows one of 5 heatings time settings
1H, 4H,
8H, 0H
or
-H
chosen by Timer Control Button
. When the heating
program is over the temperature display will show
--
,
OF
or
ON
indicating that Power is ON but the time set has expired. Add time to
resume heating or push the Power Button
to turn-off the Controller.
In PEMF Program mode Display shows one of PEMF program
settings.
P-
(PEMF OFF for FAR INFRARED and/or PHOTON functions
only),
PO
(manual frequency adjust mode),
P1, P2, P3, P4, P5, P6,
P7, P8, P9, PA, PC, PE, PF
(automatic PEMF programs). Please,
check Controller user guide for details.
If Manual Frequency adjust dial
is in active mode Display shows
current PEMF frequency in Hz (
1–30
number of pulsations per
second). Please, check Controller user guide for details.
In PHOTON Program mode Display shows one of three PHOTON
program settings.
1P
= PHOTON ON 30 minutes.
2P
= PHOTON runs 8
program cycle (One cycle = PHOTON ON 30 minutes OFF 30 minutes).
-P
(PHOTON OFF for FAR INFRARED and/or PEMF functions only).
Display may also show
OF
, flickering or static
--
if the Power Button
is not pressed or if connection between the controller and the
mat is lost. Press Power Button
to turn ON all other functions of
controller or reconnect controller to the mat tightly to resume.
6
Adjust Temperature Dial
– Use to increase or decrease heat
30~70 °C (86~158 °F). The dial range is marked, indicating the
desired temperature in °F.
7
PEMF Program Button
– Choose
P-
(PEMF off), one of 13 automatic
Program options
P1, P2, P3, P4, P5, P6, P7, P8, P9, PA, PC, PE, PF
shown on the Display
or switch to manual frequency adjust mode
PO
. Press and hold for 3 seconds to quickly return to
P-
(PEMF off).
Please, check Controller user guide for details.
8
Adjust PEMF Frequency Dial
– Use to increase or decrease
magnetic pulsation frequency from 1 to 30 times per second. You
can try different frequencies to find what works better for you.
9
Adjust PEMF Frequency Dial ON Indicator
– Lights up when PEMF
manual adjust dial is ON, frequency is chosen in manual mode,
PEMF is ON, OFF when it stops.
10
PEMF ON Indicator
– Lights up when PEMF function is ON, OFF when it stops.
11
PEMF PROGRAM CYCLE Indicator
– Lights up when PEMF is auto
cycled by program. OFF when the whole Program is over.
12
PHOTON Program Button
– Choose one of three PHOTON program
settings.
1P
turns ON Red Light LEDs for 30 minutes.
2P
runs 8 cycles
program (One cycle = PHOTON ON 30 minutes, OFF 30 minutes).
-P
(PHOTON OFF for FAR INFRARED and/or PEMF functions only).
Please, check Controller user guide for details.
13
PHOTON ON Indicator
– Lights up when the Red Light LEDs are ON,
OFF when PHOTON function stops.
14
PHOTON PROGRAM CYCLE Indicator
– Lights up when Red Light is
auto cycled by program. OFF when the whole Program is over.
2
THANK YOU
2
UNBOXING
3
CONTROLLERS
4
ADDITIONAL INFORMATION
5
SAFETY INSTRUCTIONS
5
CONTRAINDICATIONS
6
TIPS: BEFORE YOU START
7
TIPS: USING YOUR BELT OR WRAPS
8
TIPS: USE WITH CAUTION
9
TIPS: TROUBLESHOOTING
10
TIPS: TAKING CARE OF YOUR BELT OR WRAPS
11
MAINTENANCE AND CLEANING
11
WARRANTY
11
DISCLAIMER
UNBOXING
THE SET INCLUDES:
When you receive the box, it may have wear due to shipping.
Please take a moment to carefully unpack the box and check if the
set includes everything in the due condition. If you discover that
anything is missing, or there is any other reason that you wouldn’t
rate this as a 5-star experience, please, contact us right away at
support@MediCrystal.com
, so that we resolve the issue as fast as
possible.
In addition to hot stone functionality, deep FIR heat and negative
ions generated by all our products, ThermoGem™ 3-gems products,
with photon and bio-magnetic function, also produce PEMF (Pulsed
Electro Magnetic Fields) and monochromic visible Red Light with 660
nm wavelength.
It is a great reason to use it regularly to relax and reenergize even
without heating.
ThermoGem™ Bio-Magnetic Photon
Belt Vest Wrap
Bag for storage and
carrying the product
Catalog
and
User Guide
CONTENTS
CONTROLLERS
All products, controllers, specifications and data as well as a set of items packaged in a box are subject to change without notice to improve reliability, function or design of the devices.
Please, check for the most updated products details at
MediCrystal.com
web site.
Controller H-40PV
with terminal
and plug wires
Controller H-60PVA
with terminal
and plug wires
(H-60P for wrap)
OR
THANK YOU FOR PURCHASING
THERMOGEM
™
PRODUCT AND CHOOSING US!
EMF
FREE
HEATING
SYSTEM
WITH FREE SHIPPING
AND REPLACEMENT
1
YEAR
WARRANTY
MediCrystal LLC is a small family-owned company dedicated to
customer satisfaction and providing the highest quality health and
beauty products from natural amethyst, agate, tourmaline and jade at
the best possible prices.
We have personally experienced benefits from the MediCrystal® and
ThermoGem™ products and have decided to make them available to
our customers for an affordable cost.
We were so impressed by how the functionality of our mats
compared to other, much more expensive brands that we decided to
launch a business focused on creating these amazing products.
Our purpose is to let other people unveil the secret of this reviving
experience at a substantial savings from the competition. We think not
just the wealthy, but everyone interested in holistic, naturopathic and
alternative practices should be able to use the power of these gems
and crystals.
We hope you experience as many positive results as we have, now
that you have your own ThermoGem™ Product!
OR
OR
®
®
USER GUIDE
2
www.MediCrystal.com
3
Summary of Contents for ThermoGem Bio-Magnetic Photon Belt
Page 1: ......
