After replacing the battery, you should update the time and date setting.
The GlucoDr auto Meter comes with the time, date, alarm(0), average day(7d) and unit of
measurement (mg/dL) preset. However, if you need to change the setting of the meter,
or if you replace the battery, you need to enter the SET MODE and reset them. It is
important to set the correct time and date. Having the correct time and date of each
blood glucose test result will help you and your healthcare professional to track changes
in your blood glucose level.
1
To exit the SET MODE at any time, press and
hold the power button for 3 seconds. The
settings you have already made will be saved.
With the meter turned on, press and hold the power button until "SET"
appears on the meter. Release the power button to enter the SET MODE.
The Year
fl
ashes.
Press and Hold the Power Button for 3 seconds
Press and r/- button to adjust the year until the correct year
appears on the meter display. If you press and release the power button
in SET MODE, the meter will advance to the Month Setting.
Set the Year
29
Setting the Meter