7
5.Spinning process
In order to turn the ISO-TURN the indexing plunger have
to be unlocked. The indexing plunger is located at the top
of the rotation plate, drag it upward to unlock. Now you
can turn the Carrot/Carrot II with the ISO-TURN in the
direction of the car door to exit it. After that you can fix
the turntable with the indexing plunger in the desired
position. You should make sure that the indexing plunger
snaps into the right position.
6.How to remove the
ISO-TURN
You have to unlock the ISOFIX connection to
remove the turntable. Unlock of the ISO-TURN by
pushing the black balls in the driving direction on
both sides, push the ISO-TURN some millimeters
back to loose the ISOFIX hooks out of the mounting
link, lift it up and than pull the turntable. Now you
can remove the Carrot/Carrot
II with the ISO-TURN
from the vehicle.
