Care of your
LapStacker
®
●
The LapStacker
®
Retractor has not been designed for submersion in water. Doing
so will likely result in rusting of the internal components and may void your Warranty.
If you must take your wheelchair into the water it is recommended you remove the
Retractor Units before doing so.
●
The Brackets are made of aluminium to reduce weight and are not designed to be
pulled on or adjusted without first loosening the Clamp fasteners. Please be gentle
with them or they may break.
●
Wipe components clean with a damp cloth and avoid the use of chemical detergents
which may damage the plastic surfaces.
●
The straps may be cleaned using water and a damp cloth. We suggest removing the
retractors, fully extending the straps and letting them dry before retracting the straps
back into their housing again.
7
