78
Maintenance
CAUTION!
There are no user-serviceable or user-cleanable parts inside the
notebook housing. Never open the notebook housing.
Following these measures can extend the lifetime of your notebook:
•
Before cleaning, always remove the power adapter plug and all connecting cables.
•
Only use a damp, lint-free cloth to clean the notebook.
•
Do not use any solvents, corrosive or gaseous cleaning agents.
•
Dust or grease on the touchpad will impair its sensitivity. Remove dust or grease on
the surface of the Touchpad with a strip of sticky tape
•
Dust, which will close the cooling slots, can collect inside the notebook in the course
of time. This will lead to an increase in the speed of the fan and consequently also of
the operating noise of your notebook. In addition, this can lead to overheating and
malfunctions. Have the inside of the notebook cleaned by your Service Center or a
professional for this reason.
Care of the LCD Display
•
Always close the notebook when not in use. Avoid touching or scratching the surface
of the screen as it is easily damaged.
•
Make sure that no water drops are allowed to remain on the screen. Water can cause
permanent discoloration.
•
Clean the screen with a dry, soft, lint-free cloth.
•
Do not expose the screen to bright sunlight or ultraviolet radiation.
PLEASE NOTE!
Protective film is on the surfaces to protect the device against
scratching during production and transportation. Pull off all the
film after you have set up the device correctly and before bringing
it into operation
.