EN
17
5.3.1.
Programming the multifunction button
1
The
1
button can be programmed to any channel position or a particular input source
Start by selecting the function you require and then hold down the button for 5 seconds until
MY BUTTON IS SET
appears on the screen. This confirms the new programming.
After each
INITIAL INSTALLATION
your customised button programming is deleted and re-
set to the factory defaults
6. Using the device for the fi rst time
Before using for the first time, be sure to read the section “Safety instructions”.
6.1. Unpacking
• Select a suitable place for setting up the device before unpacking.
• Open the box very carefully to avoid damaging the device. The device could be damaged if you
use a knife with a long blade to open the box.
• The box contains a number of small items (including batteries). Keep these out of the reach of
children as they represent a choking hazard.
• Store the packaging material in a safe place; only use this box to transport the TV.
DANGER!
Risk of suffocation!
Packaging film can be swallowed or used improperly. Therefore, there is a risk of
suffocation!
Keep packaging material such as plastic film or plastic bags away from children.
