76
6.
Network
confi guration
The speaker is connected to the network via WiFi. The speaker's WiFi antenna
receives the signals from the network router.
6.1. Network
requirements
For the device to be able to access music files on the network, the network must
meet the following requirements:
•
The router used for the network must have a DHCP server function so it can
automatically assign a network IP address to the device.
Otherwise set the DHCP function to manual in the Web interface.
7. Connecting to a power supply
Connect the power plug of the supplied adapter (model HB40-1801800SPA) to
the
DC
socket on the device.
7.1. Switching on the speaker
To turn on the power, switch on the device using the
ON/OFF
switch at the back.
The operating LED lights up red and the speaker is in standby mode.
Briefly press the
/MODE
: button to switch on the speaker.
The operating LED lights up white insofar as the speaker is already connected to a
WiFi network. If the speaker is not yet connected to a WiFi network, the operating
LED flashes white.
7.2. Ready
mode
Press and hold the
/MODE
: button for approximately three seconds to switch
the speaker to ready mode.
The operating LED lights up red. In ready mode, the speaker keeps the network
connection so that it is immediately available the next time you switch on.
7.3. Switching
off the speaker
Switch off the speaker using the
ON/OFF
switch at the back.
The operating LED goes out.
