28
Cable
Use
to select the cable search type
DIGITAL & ANALOGUE, DIGITAL
or
ANALOGUE
for the digital or cable channel search (Analogue/DVB-C) and press
OK
.
Select
I DON’T WANT TO SCAN
and press
OK
to skip the cable channel search.
You will then be directed to the satellite channel search.
Scan mode
Frequency (MHz)
Modulation
Symbol rate (Ksym/s)
Network ID
Please configure the search options
Select
Channel Installation
Advanced
306.000
Auto
6875
Auto
Search
>
<
>
<
If you want to search for digital cable channels, the following setting options are
available:
Menu option
Setting
SCAN MODE
This is where you set the search mode. If you have
selected
ADVANCED
, only the frequencies that
are enabled are searched for programmes. In this
case, you can make settings for the following op-
tions.
If you have selected
QUICK
, only the frequencies
that are enabled are searched for programmes.
You cannot make any further settings here.
If you have selected
FULL
the entire frequency
band is searched. However, this search will take
longer. You cannot make any further settings here
either.
FREQUENCY
Set the frequency.
Only active if the
ADVANCED
option has been se-
lected in search mode.
MODULATION
Set the modulation. Standard stetting is
AUTO
.
Only active if the
ADVANCED
option has been se-
lected in search mode.
SYMBOL RATE
Set the baud rate.
Only active if the
ADVANCED
option has been se-
lected in search mode.