DE
EN
61
FR
Make sure that you shorten the RGB LED strip at the correct point. The cutting point
is indicated by a black line and a scissors symbol on the top side of the RGB LED
strip.
Shorten the RGB LED strip using scissors.
Make sure that you do not dispose of the part of the RGB LED strip with the connector
plug.
7.
Installing the product
Make sure that the installation surface is clean, free of grease and dry. Otherwise the
bonding strength of the adhesive strip may be impaired.
Make sure that there is a power socket in the immediate vicinity of the installation
surface.
Remove the protective paper from the adhesive strip on the rear side of the RGB LED
strip.
Bond the RGB LED strip to the installation surface using the adhesive strip and press it
down firmly.
Now connect the mains power adapter to the control unit by inserting the coaxial pow-
er connector of the mains power adapter into the coaxial power connector of the control
unit.
93370 DE-EN-FR DS Content 5006 4322 final.indb 61
93370 DE-EN-FR DS Content 5006 4322 final.indb 61
22.11.2019 09:25:49
22.11.2019 09:25:49