English
20
Menu TV-CHANNEL
Menu point
Setting
COLOR SYSTEM
Auto, PAL, NTSC, SECAM, PAL M, PAL N, NTSC 4.42
SOUND SYSTEM
Auto, B/G, I, D/K, L, LL, M
APS
Automatic channel search
MANUEL
You will be able to carry out a manual channel search here.
1.
Select the channel position under the
CHANNEL
point.
2.
Go to the
SEARCH
option and start a search of the frequency band down-
wards or upwards with the
directional buttons. The search will stop and
the
STORE
option will be marked each time that a channel is found.
3.
Store the channel with
OK
. .
You will be able to make a further fine tuning in the
FINE TUNING
Menu point (see
below).
PROGRAM
You will see the channels currently stored in the channel table.
Changing the channel name:
1.
Go to the channel position required and press the red
NAME
colour button.
Now, you will be able to change the initial letters: select a symbol with the
directional buttons. The symbols will appear in the sequence of:
A B C
[to]
Z 0 1 2
[to]
9 ( ) * + , . / [BLANK] –
. You will be able to enter up to a maxi-
mum of 5 symbols.
2.
Go to the next letter and so on with the
directional button.
3.
Press the
OK
colour button again at the end, in order to store the name.
Deleting a channel:
1.
Select the channel that you want to delete from the list and press the green
DELETE
colour button. The following channels will move up the table.
Entering a channel:
You will be able to shift a channel to a different position here.
1.
Select the channel and press the yellow
INSERT
colour button.
2.
Shift the channel to the required position with
and press the red
OK
col-
our button. The other channels will be shifted with it accordingly.
FINE TUNING
You will be able to make a fine adjustment to the channel currently selected with
here.
AFT
Automatic fine tuning. The automatic fine tuning will start, in the case of a deteriora-
tion of the signal, if this option is switched on.
PROGRAM AREA
Setting the reception area according to the sound norm during the automatic chan-
nel search. Select between
OTHER
(all sound norms with the exception of L/L’),
BOTH
(all sound norms inc. L/L’),
FRANCE
(only the L/L’ sound norm).
Video recorder manual storage
For example, you can use the manual search to set a video recorder to the LCD TV.
Set your video recorder to the test signal after the LCD TV and the video recorder have been connected to each other by means
of the aerial (compare Page 8).
•
Carry out the manual search with the LCD TV.
•
Store the test signal on channel position 0 (this channel position will not be occupied by a television channel), when the
signal has been found.
Summary of Contents for MD 30036
