Basic Playback Functions
Preparation:
See pages 12–17 for connection diagrams.
Connect the DVD Recorder to the TV, turn on the TV power, and select the proper
input on your TV (e.g., “AV”).
If connecting to an audio system, please turn the audio system on and make sure
that it is connected correctly.
The first time you power on this DVD recorder, please follow the on-screen
instructions.
Please note that an LED indicator will show when the unit is in standby (off) mode.
Primary Settings
This DVD recorder can be set easily by using the
buttons. To
make selections, move the yellow highlight bar to the desired item
with the navigation buttons and then press
ENTER
to confirm.
1. When the DVD recorder is turned on for the first time, the TV
screen shows the following message:
Press the
direction keys to
choose the menu language, then
press
ENTER
to confirm.
2. Time and date:
Use the
direction keys to
move the cursor. Use the
direction keys to change to the
correct the numbers. When you
are finished setting the time and
date, highlight “Completed” and press
ENTER
to
confirm.
3. Selection
of input signal:
Use the
direction keys to select the signal input
source. Press
ENTER
to confirm or select ”Skip” to
complete this setting later.
The DVD recorder auto-searches the selected signal
type to find channels. When finished, the screen
shows:
4. Press
ENTER
to exit setup.
23
MD 40570 DVD Recorder
User’s Manual
basic playback functions
Choose English menus
De Choose German menus
Press<ENTER> to continue
Please select signal type:
Cable
Antenna
Skip
Channel searching done!
To exit press <ENTER> key
Please set the time and
date:
AM/PM HH:MM
AM 00:00
MM/DD/YY
00/00/00
Completed
