41
MD 4
1035
DVD Recorder
User’s Manual
Manual Disc Recording
1. Place an initialized DVD+R or DVD+RW disc in the DVD recorder (see p. 38).
2. Select the channel you want to record.
3. Press
MONITOR
on the remote to switch to external input mode.
4. Press
SOURCE
to select the input source that you want to record. Press
SOURCE
multiple times to cycle through the options:
CVBS1 > CVBS2 > S-VIDEO > CHANNEL
5. Press
RECORD
on the remote control or the front panel of the DVD recorder to start
recording.
6. Press
STOP
to stop recording. Please wait while the screen displays “WAIT.” After
15 to 17 seconds, the screen displays “LIVE”, and your recording is done.
7. Press
MONITOR
to switch to DVD mode. The recorded title will appear on the screen.
Press
ENTER
to view your recorded video.
After recording, the following messages will also be stored:
•
Record date and channel source.
•
Record time.
•
Recording length and recording mode.
•
Recording index screen.
DVD+RW:
These discs can be erased and recorded over.
DVD+R:
These discs can be recorded and finalized only once. They cannot be
erased and recorded over.
Pause recording
1. Press
PAUSE
while recording to temporarily stop the DVD recorder from recording
information. This may be useful for excluding sections that you do not want to
record, such as TV commercials.
2. Press
PAUSE
again to resume normal recording.
Chapters
Chapters can only be added after your recording has completed, not during the
recording itself. Please see page 44 for more information about adding chapters.
manual disc recording
