15 x 15 mm
14.10.2009 08:05
7
Clean battery and device contacts before inserting the batteries, if
necessary.
Remove exhausted batteries from the device immediately.
Remove the batteries from the device if it will not be used for a longer
period.
Isolate the contacts of the batteries with adhesive strips if you want to
store or dispose of the batteries.
Set-up location
Place and operate all components on a stable, level and vibration-free
base, to avoid the device toppling over.
Do not subject the device to any vibrations; they can damage the
delicate electronics.
Pay attention that no direct sources of heat (e.g. heating installation)
have an effect on the device.
No open sources of fire (e.g. burning candles) must stand on or in the
vicinity of the device.
Pay attention that the ventilation slots are not covered, so that sufficient
ventilation will always be guaranteed.
Do not put any objects on the cable, because it could be damaged
otherwise.
Maintain a minimum distance of approx. 10 cm between walls and the
device or power pack. Ensure sufficient ventilation.
Do not operate your device in the open air, because external influences,
such as rain, snow, etc. can damage the device.
Maintain at least one metre distance from high frequency and magnetic
sources of interference (a television device, loudspeakers, mobile
phones, etc,), in order to avoid functional disruptions.
Summary of Contents for MD 86162
Page 16: ...16 leaking battery ...
