9
ENGLISH
Attention!
1. While using the DVD player function, insertion of storage card will make the device switch to
media player mode automatically.
2. To return to DVD player mode, press the DVD MODE key on the remote controller.
Media Player
The device can play JPEG (.JPG) / MPEG1 (.MPG) / MPEG2 (.DAT) / Mp3 (.MP3) / MPEG4
(.DivX) [optional] files in the disc or in the storage card on TV / projector. Refer to following
instructions to use this function.
Playing JPEG File: Viewing
1. Connect the device to TV/projector and power them on.
2. Insert the disc or the storage card that contains JPEG files.
The two card sockets cannot be used simultaneously, so please insert only one card at
one time. Otherwise, using the disc and the card simultaneously is not recommended.
3. After the insertion of the disc or the
storage card, the device will show the
contents in the disc or the card
automatically by preview function.
4. Use the arrow key
to preview the photos and press the
key to show the photo
on the full screen.
5. While playing, press the
or the
key to switch to the next or the previous file. To quit
viewing, press
.
Attention! Photo does not come out on preview screen when its resolution is much different
compared with the last photo.
Playing JPEG File: Rotating
In the viewing frame of the file, press the
or the
key to rotate the picture clockwise or
counterclockwise in 90 degrees.
Playing JPEG File: Zooming
1. In the viewing frame of the file, press the ZOOM ON/OFF key to activate the zoom function.
2. After the zoom function is activated, press the ZOOM OUT or the ZOOM IN key to zoom the
picture out/in from 25% to 200%.
3. When a picture is zoomed in, there must be some part of the picture out of the screen. Use
the arrow keys on the remote controller moving the picture to watch the hidden part.
4. When the zoom function is activated, the rotate function cannot work.
Playing JPEG File: Slide Show
There are 13 transition modes of slide show, press the TRANS MODE key on the remote
controller to activate it and select different modes.
