DE
EN
FR
39 of 108
NL
7.2. Attaching the mixing bowl with blades
1)
Place the drive rod onto the stand
housing.
2)
Place the mixing bowl onto the
drive rod and screw it onto the stand
housing in a clockwise direction so
that the handle is then pointing to
the right.
3)
Place the blade adapter onto the
drive rod.
4)
Place the slicing disc onto the blade
adapter. Ensure here that the two
slots on the slicing disc fit onto the
two tabs on the blade adapter.
5)
Place the splash guard lid onto the
mixing bowl so that the catches
on the lid engage with the corre-
sponding slots on the mixing bowl.
6)
Twist the splash guard lid onto the
mixing bowl until it closes tightly
and the protrusion on the lid is fully
aligned with the handle on the
mixing bowl. If this is not done cor-
rectly, the safety contact on the base
will not allow operation.
NOTICE!
Safety contact on the mixing bowl
The food processor cannot be operated if the mixing bowl is
incorrectly fitted. If incorrectly fitted, the safety contact on the
housing edge will prevent operation.
Use the pusher to insert food through the feed chute.
15482 DE EN FR NL ECommerce Content RC1.indb 39
15482 DE EN FR NL ECommerce Content RC1.indb 39
14.09.2015 13:47:51
14.09.2015 13:47:51
Summary of Contents for micromaxx MD 1548
