39 of 122
EN
DK
GPL/
LGPL
NOTE
To do this, it is useful to plug all the adapt-
ers that are to receive the new Powerline net-
work key into the same multiple socket.
Both Powerline Adapters are connected and
ready for operation. The
POWER
LED lights up.
This step is to be carried out on each adapter.
Press the
SECURITY
button on the Powerline
WLAN Adapter for 12 seconds or the
SECURITY/
RESET
on the Powerline Adapter for about 5–8
seconds.
The device will be reset and restarts. All LEDs go off for
a short while. This Powerline Adapter now generates a
random, unique network key.
Press the
SECURITY
button on the Powerline
WLAN Adapter again for about 2–3 seconds or
the
SECURITY/RESET
button on the Powerline
Adapter for about 1–2 seconds.
The Power LED flashes green.
Press the
SECURITY
button on the Powerline
WLAN Adapter again for about 2–3 seconds or
the
SECURITY/RESET
button on the Power-
line Adapter for about 1–2 seconds on the
second
Powerline Adapter.
The Power LED flashes green.
Once both the
POWER
and the
POWERLINE
LED
light up permanently green, the encryption has been
completed successfully.
Summary of Contents for Powerline MD 90222
Page 53: ...52 of 122 ...