Menu Item
Settings
APPLICATION
VERSION
Version display
AUTO TV OFF
Here you can set the time interval for the auto shutdown function. Once
the interval is reached, the TV will switch off.
AUDIO VIDEO
SHARING
Toggle audio-video sharing. This function allows data exchange with
other multimedia devices such as PCs, smartphones, cameras, etc. Read
the section "Video audio sharing – using network service" on page
51
If you disable the
AUDIO VIDEO SHARING
function,
you will no longer be able to display audio, video
or photo fi les on the smart TV. The DMR function
(digital media renderer) is then switched off.
POWER UP
MODE
Select the power-on mode
STANDBY
or
LAST STATE
. When you press
the Power button, this turns the device on in standby mode or retrieves
the most recently selected setting.
VIRTUAL
REMOTE
Activate/deactivate the virtual remote control. This allows the operation
of the TV via other devices.
CEC
(consumer
electronics
control)
Enable this function to enable the communication of all devices that
are connected via HDMI. In this way, you can, for example, control all
devices within an HDMI network using only one remote control. Enable
this function if you also want to specify settings under the following
option:
SPEAKERS
.
Enable the CEC function fi rst and select
HDMI1
as the source. If you
have already connected a CEC-enabled device, the name of the
device is listed instead of
HDMI1
. The basic functions of the device
can then be automatically controlled by using the remote control of
the smart TV.
If the CEC feature is enabled and
HDMI1
was
selected as the source (CEC-enabled device
connected), the OSD menu of the smart TV can no
longer be called up via the
MENU
19
button.
CEC AUTO
POWER ON
This function allows you to turn on the TV with the connected HDMI-
CEC-compatible device and automatically switch to the input source.
Select
AKTIVIEREN
if you want to use this function.
SPEAKERS
(ARC)
The default setting for the speakers is
TV
, so that only the internal
speakers are used for the sound output. This setting can only be
changed if you have previously enabled the CEC function. If you have
done so, it is possible to select the
AMPLIFIER
setting and integrate
an external amplifi er into a CEC network via the
HDMI1
port
9
. The
internal speakers are muted in this case. The volume buttons on the
remote control now control the device connected to the
HDMI1
port (no
OSD display of the volume bar).
Due the great variety of different devices, correct
functioning cannot be guaranteed.
OSS
Display the licence information on Open Source Software.
44
Via the OSD menu