About these operating instructions
Read the safety instructions carefully before using the device for the fi rst time. Note the warnings on
the device and in the operating instructions.
Always keep the operating instructions close to hand. If you sell the device or give it away, please
ensure that you also pass on these instructions.
Explanation of symbols
DANGER!
This signal word indicates a hazard with a high level of risk which, if not avoided, will result in death or serious
injury.
WARNING!
This signal word indicates a hazard with a medium level of risk which, if not avoided, could result in death or
serious injury.
CAUTION!
This signal word indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate
injury.
NOTICE!
This signal word warns of possible damage to property.
This symbol gives you useful additional information on assembly or operation.
Declaration of conformity (see section ‘Declaration of conformity’): Products that feature
this symbol meet the requirements of the EC directives.
www.tuv.com
The Tested Safety Mark (GS Mark) is used to certify that a product complies with the
requirements of the German Product Safety Act (ProdSG). These requirements are described
in the accident prevention regulations from the employer's liability insurance associations,
the DIN standards and European standards or other generally recognised technical
regulations.
Safety class II
Electrical appliances in protection class II are electrical appliances that permanently have
double or reinforced insulation and do not have any connection options for a protective
earth. The housing of an electrical appliance in protection class II that is enclosed in
insulated material can partially or fully act as the additional or reinforced insulation.
9
About these operating instructions