6
GB
The insulating strip must be pulled out of the battery compartment on the
underside of the unit before the scale can be operated. Replace the batterie if the
battery change symbol "
LO
" appears in the display or if nothing appears in the
display after you have stepped on the device. Please note polarity (positive pole
upwards; facing towards the lid).
3 Insert/replace batteries
You may have your weight displayed in kilograms (kg) or pounds (lb). Press
button until the unit desired is shown.
4 Change the unit of weight
Make sure the scales are on a firm, level surface. If you only want to weigh
yourself but have moved the scales just before, you must first initialise the
scales. To do this, press your foot on the middle of the surface of the scales.
"
0.0 kg
" appears in the display.
When the scales switch off, they are ready
for the “step-on” function
. This procedure is not necessary if you have not
moved the scales.
Step onto the scales and stand still. The device switches on automatically and
the display briefly shows "
0.0 kg
".
Your weight is measured, flashes three times and is then finally displayed.
Step down from the scales. The scales switch off automatically after 10
seconds.
5 Weighing “Step-on”-function
1.
2.
3.
4.
The scales can store data for up to 10 people: sex, age, height. The scales have
preset values. These are:
kg, male, 30 years old, 170 cm
.
6 Programming personal data
Press the SET button to switch on the scales. The memory location is
flashing in the display.
Now press - or -button to select the desired memory location (0 - 9)
for the user profile.
Press the SET-button to confirm the selection. Now the symbol for the sex
is flashing in the display.
= Man = Woman
1.
2.
3.
Summary of Contents for 40677
Page 3: ...Gerät und Bedienelemente Cihaz ve Kullanma Elemanları Device and controls ...
Page 4: ......
Page 18: ...14 TR ...
Page 19: ...TR 13 ...