2 Setting the time and date (initial setting)
5
1.
After insertion of the batteries
the monitor switches on
automatically.
The correct setting of time and date is especially important, if you intend to use the memory
function of the device.
2.
The last two digits of the year
flash in the display. Press
to set the correct value and
press
to confirm.
3.
Repeat step 2, to enter the
date and time. The area
flashes for the setting being
made at the time.
4.
The icon appears in
the display.
The device is now ready
for the test with control
solution.
The unit of measure (mg/dL or mmol/L) is installed
in the device. If you want to change the unit of
measure, contact the customer service.
>
>
mmol/L
>