6
3 Performing a test with control solution
You need the device, a test strip and the control solution.
1.
Insert a test strip into the
monitor in the direction
of the arrow.
The -symbol
appears automatically.
2.
Press the - button, until
the symbol (control solution
measurement mode) appears.
The drop symbol flashes.
Press
to confirm the
setting.
3.
Place the device on a flat and
even surface, e.g. like a table.
4.
Remove the cap of the control
solution bottle and wipe the tip
of the bottle with a tissue.
The measurement results in the control solution measurement mode will not
be recorded in the memory for blood glucose readings.
mmol/L
mmol/L
mmol/L
>
>
>
>
