TREADMILLS MOD. 870A/870S/870C
Rev.1/01.07.2019
© Medisoft RAM Italia S.r.l.. All rights reserved.
6
Non-compliance with any of the above warnings and cautions exempts the
Manufacturer from any responsibility for any accident or damage derived from
non-compliance.
1.5
SAFETY REGULATIONS
WARNING !
Incorrect use of this equipment may cause injury. Please ensure that the
safety regulations listed below are strictly observed:
1. Read this User Manual and the plates attached to the underside of the
treadmill hood carefully. Before operating the treadmill ensure you are
completely familiar with the control panel and its key functions.
2. Before connecting any equipment or device to a network, insure that this is
compatible with input voltage for device operations (230 Vac, 50
– 60 Hz). A
lower input voltage, below values indicated on plate, would result in uneven
performance of treadmill, particularly at lower speeds.
3. Medical procedures such as cardiac stress tests, pulmonary function tests, or
motor rehabilitation processes are only to be carried out by adequately
qualified medical personnel.
4. Before beginning any exercise program check with your doctor to determine
your present physical condition and ability to undertake aerobic exercise. This
is especially essential for people suffering from abnormal blood pressure,
smokers, people addicted to stimulants, or taking other medication, people
suffering from cardiovascular disease, or those at risk of hereditary
cardiovascular disease.
5. During exercise, it is important to wear adequate shoes and clothing. Avoid
shoes with leather soles, heels, anti-slip strips, and spikes. The most
appropriate shoes are gym shoes with a soft rubber sole.
6. Do not step onto the running belt without shoes.
7. Do not put drinks or other liquids on or near the treadmill.
8. Do not leave clothing or towels on or near the treadmill. Such items may
seriously interfere with the moving parts of the equipment.
9. Do not scratch the plastic control panel of the treadmill with sharp objects such
as pens or screwdrivers.
10. Before moving the treadmill, make sure that the power switch is OFF, and it is
unplugged from the mains power outlet.
11. If, for any reasons it becomes necessary to move the equipment, you must
insure that the equipment power switch is turned off and that the equipment is
unplugged and rendered inoperable, before moving the equipment. If the
